AT1 Panel

Mosteel AT1 Panel

Mosteel Lightweight Concrete Panel

MoSteel® is a lightweight, non-load bearing precast wall panel, composed of calcium silicate cement board with a mixture of cement, expanded polystyrene (EPS), and sand, bonded together using technical additives.

It reduces the five steps used in conventional frame construction into one simple system providing structure, insulation, vapor barriers, and firewalls.

OUR ADVANTAGES

Why switch to Mosteel

Fast and Cost Efficient

Mosteel panels are completely fabricated off-site and need only to be installed on site. It cuts down the installation time from 4 to 2 months.

Durable

With a compressive strength of 400-700 PSI, our panel is ideal especially in high-rise buildings since the load is a major consideration in design and construction cost.

Light weight

3x lighter than concrete hollow blocks. The core material is filled with fire-rated Expanded Polystyrene (EPS).

Fire Resistant

Fire proof rating of 4 hours against 1000°C. Perfectly meets the international environment protection criteria.

Water and Moisture Resistant

Ficem boards and EPS is virtually inert, does not absorb moisture, and is decay-resistant. It will keep water from seeping through the panels.

Energy Saving

Mosteel is reusable and recyclable. The wallboards can easily be dismantled and reused which is economical and eco-friendly.

Superior Thermal and Sound Insulation

Keeps your surrounding peaceful and cool even during the summer.

Space Saving

Maximize usable area as no plastering is needed. It comes in 100mm and 150mm thickness to fit your need.

Technical Specification

Description	MoSteel® 100mm	MoSteel® 150mm
Dimension	610mm X 2440mm	610mm X 2440mm
Weight	90kgs	125kgs
Compressive Strength	400-700 psi	400-700 psi
Surface Density	92.4 kg/m2	120 kg/m2
Anti-Pressure Strength	3.6Mpa	4.2Mpa
Moisture rate	3.70%	3.70%
Softening coefficient	1	0.81
Anti-bending damage load times over dead weight	3 times (No damage)	3 times (No damage)
Anti-impact performance	No cross crack on panel	No cross crack on panel
Single point hanging strength	No break and cross crack on panel	No break and cross crack on panel
Fire resistance	4 hours	4 hours
Heat Transfer	0.1478W/(m.k)	0.1478W/(m.k)
Density	650 kg/m3	650 kg/m3
Ceramic Tile Weight Capacity	15 kg/m2	15 kg/m2

Technical Specification

Mosteel is used for non-load bearing interior & exterior walls. Mosteel is used in different types of buildings such as:

Residential Unit
Warehouses and Factories
Schools and Universities
Mass Housing
High Rise Buildings
Hospitals
Commercial Establishments
Demising Walls
Perimeter Fence

Polywall® is an energy-efficient wall partition with an insulation composition. These save cooling costs as well as reduce HAVC sizing by 30 to 40%, providing comfortable surroundings reduced temperature variations, reduced noise, and better indoor air quality.

AT1 Panel

Mosteel AT1 Panel

Mosteel Lightweight Concrete Panel

OUR ADVANTAGES

Why switch to Mosteel

Fast and Cost Efficient

Durable

Light weight

Fire Resistant

Water and Moisture Resistant

Energy Saving

Superior Thermal and Sound Insulation

Space Saving

Technical Specification

Technical Specification

Useful Links

Subscribe Now

©2023. Mosteel. All Rights Reserved.